The Pediatric lO Leg Trainer is desiqned for healthcare professionals to practice and refine pediatric intraosseous iniection techniques. The trainer accurately simulates the anatomy of the tibia and patella, allowing users to identify and practice intraosseous needle insertion based on the anatomical structure.
Set Up Steps for the Pediatric IO Leg Training Kit:
Step 1: Loosen(but do not remove)the vent cap on the bone to allow the air to escape when filling.
Step 2: Connect the syringe filled with red liquid to the Pediatric IO Leg Trainer.
Step 3: Inject the red liquid into the bone and tighten the vent cap when there is blood coming out.
Step 4: Cover the skin and begin the injection practice.
Step 5: Begin your IO injection training.
Step 6: After removing the lO needle. plug the hole with wax to prevent the liquid from leaking out.
Note: To ensure safe and effective use of this training kit, please practice under the quidance of a qualified professional. This will ensure proper technique and enhance the learning experience.
How to Replace the Bone?
- Unscrew the connector at the end of the bone to remove the old one.
- Place the new bone in position, ensuring it is securely attached by tightening the connector.
Cleaning and Protection
- Draw out the red liquid from the bone cavity. Then fill the syringe with clean water and do repeated iniections and withdrawals to flush the bone.
- The trainer can be rinsed with clean water or wiped with wet wipes to remove any remaining residue.
- Once thoroughly cleaned and dried, put it away for future use.
- Avoid direct exposure to high temperatures.
Safety Warning
- All accessories of this product are intended for use with the Pediatric IO Leg Trainer only. Do not use on humans or animals.
- Please store the simulated blood powder properly, keeping it out of reach of children, and avoid ingestion of the simulated blood powder.
Watch: Setting Up and Use Infant Intraosseous(IO) Leg Trainer